Electrodry Floor Sanding Brisbane
We make old floors like new again
We make old floors like new again
Electrodry Brisbane are specialists in floor sanding and refinishing. With our wide range of toners and stains, high-quality, floor coatings, and expertise in timber floors, we’ll leave your floors looking better than ever. This is what you get:
Our refinishing systems are suitable for a variety of floor types, including hardwood, engineered floors, bamboo, cork, laminate and vinyl.
We apply a high-quality 2-pack polyurethane coating to keep your floor looking great for years to come.
Our expert technicians are highly-trained, guaranteeing the highest industry standards possible for your floor.
We offer several refinishing options so that you can book the service best suited to your needs and budget.
As proud ATFA® members, we have access to the most up-to-date knowledge and expertise necessary to handle your timber floors with the utmost care and precision.
We offer a comprehensive range of refinishing options tailored to address whatever condition your floor may be in.
With Electrodry’s special dust capture system, you won’t need to stress about dust building up in your home.
Our technicians strive to deliver the finest finish for your flooring, whether you prefer a gloss, matte, satin, or ultra-matte appearance.
We charge a $50 quote fee which is later deducted from the total cost when you book any Electrodry service. An on-site visit ensures that our quotes are all inclusive, so there will be no hidden surprises.
Call our hotline 13 27 13 or schedule a quote and pre-inspection online.
During the visit, our technician will tell you the cost, likely results and answer all your question.
Book with peace of mind knowing exactly what to expect on the day of your service.
*Quotes incur a $50 fee which shall that shall be deducted from the cleaning costs if you proceed with the quoted work or another Electrodry service.
We start by giving the area to be sanded a thorough clean and punching nails deeper into the boards where required.
The floor is sanded with a weighted rotary sander, which removes less wood than a belt sander so that your floor will endure longer.
We continue sanding your floor, using progressively finer grades of sandpaper to remove scratches and discolouration and to give your floor a smooth finish.
Next, we sand the edges using a hand-held rotary sander, with the final sand being done with an orbital sander, leaving a smooth, scratch-free finish.
We then apply a barrier seal to your floor to prepare it for coating. If required, this can be followed by a thin coat of a desired toner.
The last step is to apply two coats of high-density, two-pack water-based polyurethane for a durable finish.
Discover the perfect refinishing solution for your wood floors with our range of options that are designed to effectively remove scratches, rejuvenate worn floors and restore old floors with expert colour blending and a wide choice of finishes.
From $20/square metre
Bring back that wood floor look you love at the fraction of the cost of sanding.
Removes small scratches and minimises large scratches
Non-sanding, dust-free and odourless
1-day service, ready to walk on in hours
Deep cleans and removes dirt, grime and cleaning product residue
Amazing results at the fraction of the cost of sanding
Gives your floor a gorgeous satin finish
From $28/square metre
The ideal non-sanding alternative for dirty and worn floor
Removes small to medium scratches and recoats damaged areas
Non-sanding, dust-free and odourless
1-day service, ready to walk on in hours
Deep cleans and removes dirt, grime and cleaning product residue
Applies durable and scratch-resistant 2-pack water-based coatings.
Choose from a range of finishes including gloss, satin, matte, and ultra-matte.
From $80/square metre
Make your old floors like new again! Removes less wood than traditional sanding.
Sands out most damage and scratches for a brand new look
Exclusive dust-capturing system
Usually finished in just 2 days
Durable, scratch-resistant 2-pack water-based coatings
Expert colour blending, toning and staining
Choose your finish of gloss, satin, matte and ultra-matte
Discover how Electrodry Floor Sanding can help you tackle common wood issues such as sun damage, scratches, residue from products, and worn patches, providing effective solutions to refresh and restore the appearance of your floors.
Sun Damage
Our Timber Refresh, Restore and Sanding services are designed to address anything from light to deep scratches.
Scratches
If your wood floor has blotchy residue or dark wax build-up from detergent or wax-based products, our system can effectively remove them, leaving your floor residue-free.
Residue From Products
We can restore worn patches on your floor without the need for sanding, saving you time and money while ensuring a refreshed look.
Worn Patches
We can restore worn patches on your floor without the need for sanding, saving you time and money while ensuring a refreshed look.
| 1st internal unit | $189 from |
|---|---|
| succeeding internal units | $159 |
| external unit | included* |
*The price includes cleaning both internal and external units. For split system air conditioners, external units must be on ground level with flat, paved access to allow equipment transport. If the external unit is on a balcony, it must be on the same floor as the internal unit. A minimum callout fee may apply depending on your location.
Our 14-day satisfaction guarantee ensures your peace of mind. We address concerns promptly, free of charge, based on valuable customer feedback. Rest assured, we take action to resolved any quality issues identified in surveys.
ELECTRODRY'S COMMITMENT TO QUALITY
While it is possible to use a hand sander to sand a floor, it's not recommended due to its small surface area capacity. Hand sanders are designed for small or detailed sanding projects. Using it on a floor can be time-consuming and physically demanding. It's recommended to use a floor sander for better efficiency and results.
Mopping the floor after sanding is recommended to remove accumulated dust and debris. Using a damp mop or cloth is important to avoid excess water that can damage the newly sanded floor. Waiting for the floor to dry completely is also important before applying any finishes or sealers.
Floor sanding and polishing duration depends on factors like floor size, damage, and finish. It can take one to three days for a standard-sized room, but longer for larger areas or floors with extensive damage. Proper drying times are important to ensure a smooth finish. Consult a professional for an accurate timeline.
To prepare a room for floor sanding, remove furniture and cover fixtures with plastic sheeting. Remove trim or baseboards that are in the way and clean floors thoroughly. Wear protective gear like a dust mask, gloves, and eye protection during preparation. Hiring a professional for floor sanding is recommended.
In most cases, finding somewhere else will be your most comfortable option. This is especially important if you are pregnant or suffer from asthma, as the smells and noise from our work may be problematic. If your most important rooms aren’t being sanded, you can choose to stay in the house, but it is important to note that you will not be able to access or walk through the rooms being sanded.
Floor Sanding and Refinishing Brisbane is the newest service offered by Electrodry all across Brisbane. Electrodry opened in Brisbane in 1986, with only a few of our classic services: Carpet Dry Cleaning, Upholstery Cleaning, as well as some we no longer offer, like drapery cleaning! Since then our expertise has expanded, and we now offer a range of wooden floor services, including the no-sanding options, Timber Refresh and Timber Restore. In 2018 Electrodry Brisbane completed over 14,000 jobs. We have a team of 20 technicians with specialities in different services. Four of these specialise in wood floor refinishing services, so you can know that if you book a floor sanding job, we’ve got the expertise to do a great job.
Monday
8am–6pm
Tuesday
8am–6pm
Wednesday
8am–6pm
Thursday
8am–6pm
Friday
8am–6pm
Saturday
8am–6pm
Sunday
8am–4pm
2/32 Northlink Place, Virginia, Qld 4014
Albion, Kippa-Ring, Chermside, Albany Creek, Everton Park, Kelvin Grove, Annerley, Coorparoo, Runcorn, Sunnybank, Forest Lake, Beenleigh, Birkdale, Redland Bay, Carina, Wynnum, Ipswich, Strathpine, Caboolture, North Lakes, Shailer Park
